Hot Sell Stainless Steel Kitchen Adjustable Feet Round 2" Dia Furniture Leg Pack of 4

About This Item
 

• [Load-bearing] Each load-bearing capacity is 25KG, 4 of them have a total load-bearing capacity of 100KG, and the number can be added as needed. Although the stainless steel part is hollow, the stainless steel itself is very hard. Our product qualification certificate proves this. The service life of the product can reach fifteen years or more.
• [Screws] The suitable screws for the furniture legs are M3.5x16mm, They are not included in the product
• [Basic function] The amount of adjustment provided by the threaded rubber stop is sufficient to compensate for uneven ground It is an ideal choice for coffee tables, sofas, TV cabinets, beds, bathroom cabinets, office furniture, kitchens, cabinets, shelves, etc. It can also be used as a support for the desktop partition to create a drawer space They can adjust the height of the cabinet feet from 10CM to 11.5CM, which can blow out the debris under the cabinet
• [Features] The plastic part design will not wear your painted partitions or wooden floors The lightweight design of stainless steel, even if the body bumps against the stainless steel furniture feet, there will be no pain or injury Smooth design of stainless steel material, you can paste your favorite drawings on the stainless steel part
• [Note] 1,The furniture needs to be lifted instead of pushed and pulled when moving, which is beneficial to prolong the service life of the furniture feet2. Need to tighten the plastic thread part.3.Adjust the furniture to a suitable height for more comfortable use

• TWO CHOOSE(50MM and 104mm)
• Material: stainless steel+plastic
• Color: black+sliver
• maximum adjustable height is about 15mm.
• FOR 50mm Height

•  

   

• Size: approx. 50 x 60 x 50mm/1.97 x 2.36 x 1.97"(Dia x W x H)
• Diameter: approx. 5cm/2"
• Note: Each leg load bearing is about 37.5 kg, 4 legs is about 150 kg, adjustable part is black plastic base

•  

   

• FOR 104mm Height

•  

   

• Height:104mm/4"
• Diameter: 55mm/2.1"
• Square Length:68.3mm/2.7"
• Adjustable Height: Max. height 120mm/4.7",Mini. height 104mm/4"
• Note: Each leg load bearing is about 25 kg, 4 legs is about 100 kg, adjustable part is black plastic base

• Create a lot of space and storage location
• The furniture feet can not only be used to raise the furniture, but also can be used as a support for the desktop partition to create a space for drawers
• That is to lift a shelf unit a few inches off the ground so that it can be placed above the skirting board and installed in the small space between the wall and the radiator
• maximum adjustable height is about 17mm.
• The stainless steel material has a smooth design, you can paste your favorite drawings on the stainless steel part

• Product certification report
• for,50mm ,4 legs is about 150 kg, for 104mm ,4 legs is about 100 kg
• Although the stainless steel part is hollow, the stainless steel itself is very hard. Our product qualification certificate proves this, and the product has a long service life.
• Adjustable feet are basically screw caps, you can completely unscrew them, but they are really easy to screw back.
• It is not easy to slide during installation and can sink quickly and easily. They are perfect for use at home, office or workplace
• Easy to install
• 1. Prepare the installation tools ,Screwdriver and screws
• 2. Mounting screws corresponding to the holes
• 3, the installation is complete

SPECIFICATION

• The product material is composed of stainless steel and plastic, It is an ideal choice for coffee tables, sofas, TV cabinets, beds, bathroom cabinets, office furniture, kitchens, cabinets, shelves, coffee tables, bedside tables, sofa side tables, etc.
• Stainless steel material is easy to clean and does not change color for a long time
• The lightweight design of stainless steel, even if the body bumps against the stainless steel furniture feet, there will be no pain or injury
• Furniture feet can not only be used to raise furniture, but also can be used as a support for desktop partitions to create space as a drawer
• The plastic part design will not wear your painted partitions or wooden floors
• You can increase the number of furniture feet as needed
• The amount of adjustment provided by the threaded rubber stop is sufficient to compensate for uneven floors

Ningbo Ao Yue Machinery Co., Ltd is located in the beautiful port city of Ningbo with more than ten years experie
nce in the production of metal stamping,precision stamping metal work,CNC punching, Metal Welding, Deep Drawing,Bending,
Sheet Metal Fabrication,Laser Cutting,Tool and Die Work,etc. With experienced engineers, skilled workers and advanced 
equipment, our products rely on its stable quality and attractive appearance has been recognized by domestic and foreign 
markets. In addition, we offer ODM/OEM service which means our products can be tailored according to customer's 
requirements.We have our own factory and Machines as Laser Cutting machine, Bending machine, Hydraulic Machine,
Punching machine,Argon Arc Welding and Gas Metal Arc Welding,Lathe Machine and Miller Machine, 
our products are mostly exported to Europe, North America, Australia Our slogan is : "If you have an idea, 
we can Make it Ture!"
Since 2008, Ningbo Ao Yue Import and Export Co., Ltd has been focusing on becoming global leading sourcing agency of outdoor products.

Ao Yue covers outdoor products for camping, greenhouse garden,BBQ grill & shelf,  and cycling, etc. We provide our clients with service of OEM, 
ODM, global sourcing and resource combinations, together with solutions and designs to meet demands from different market. Ao Yue is aimed to
 help customers obtain the greatest benefits and successful business.

Why choose us?